Related Manuals for Axis Q1645-LE
Summary of Contents for Axis Q1645-LE
- Page 1 AXIS Q16 Network Camera Series AXIS Q1645-LE Network Camera AXIS Q1647-LE Network Camera User Manual...
-
Page 2: Table Of Contents
Applications ........... . AXIS Video Hosting System (AVHS) ....... . . -
Page 3: Get Started
Find the device on the network To find Axis devices on the network and assign them IP addresses in Windows®, use AXIS IP Utility or AXIS Device Manager. Both applications are free and can be downloaded from axis.com/support. -
Page 4: Access The Device
Bonjour as a browser bookmark, go to Safari > Preferences. If you do not know the IP address, use AXIS IP Utility or AXIS Device Manager to find the device on the network. 2. Enter the username and password. If you access the device for the first time, you must set the root password. See Set a new password for the root account on page 4 . -
Page 5: Webpage Overview
AXIS Q16 Network Camera Series Get started Webpage overview Live view control bar Live view Product name User information, color themes, and help Video control bar Settings toggle... - Page 6 AXIS Q16 Network Camera Series Get started Settings tabs...
-
Page 7: Additional Settings
Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet. To find the latest version of the datasheet, go to axis.com. - Page 8 AXIS Q16 Network Camera Series Additional settings • For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and sun during daytime, select Flicker-reduced. Select the same frequency as the power line frequency.
- Page 9 • Zoom Optimize the image for traffic surveillance To get the best possible image for traffic surveillance, use the AXIS Traffic Wizard in combination with the Traffic overview scene profile. 1. Go to Settings > Apps > AXIS Traffic Wizard.
- Page 10 AXIS Q16 Network Camera Series Additional settings 4. Select units (metric or imperial). 5. Enter the values for Road distance, Camera height, Vehicle distance and Max speed. 6. To make both dark and bright areas of the image visible, turn on WDR.
- Page 11 AXIS Q16 Network Camera Series Additional settings Find out more about WDR and how to use it at axis.com/web-articles/wdr. Hide parts of the image with privacy masks You can create one or several privacy masks to hide parts of the image.
-
Page 12: View And Record Video
AXIS Q16 Network Camera Series Additional settings 3. Attach the new lens and connect the lens cable. 4. Reconnect the power. 5. Log in to the product’s webpage, go to the Image tab and then select the P-Iris lens you have installed. -
Page 13: Set Up Rules And Alerts
This example explains how to display the text “Motion detected” when the device detects motion: Make sure that AXIS Video Motion Detection is running: 1. Go to Settings > Apps > AXIS Video Motion Detection. 2. Start the application if it is not already running. - Page 14 1. Go to Settings > System > Events and add a rule. 2. Type a name for the rule. 3. In the list of conditions, under Application, select AXIS Video Motion Detection (VMD). 4. In the list of actions, under Recordings, select Record video while the rule is active.
- Page 15 AXIS Q16 Network Camera Series Additional settings 7. Set the postbuffer time to 60 seconds. 8. In the list of storage options, select SD card. 9. Click Save. Record video when the camera detects impact Shock detection allows the camera to detect tampering caused by vibrations or shock. Vibrations due to the environment or to an object can trigger an action depending on the shock sensitivity range, which can be set from 0 to 100.
-
Page 16: Add Audio
AXIS Q16 Network Camera Series Additional settings 5. Type a subject and a message for the email. 6. Click Save. Add audio Add audio to your recording Turn on audio: 1. Go to Settings > Audio and turn on Allow audio. -
Page 17: Learn More
The image shows how the field of view and aspect ratio can change between two different capture modes. Which capture mode to choose depends on the requirements of frame rate and resolution for the specific surveillance setup. For specifications about available capture modes, see the product’s datasheet at axis.com. Remote focus and zoom The remote focus and zoom functionality allows you to make focus and zoom adjustments to your camera from a computer. -
Page 18: View Area
H.264 or MPEG-4 Part 10/AVC Note H.264 is a licensed technology. The Axis product includes one H.264 viewing client license. To install additional unlicensed copies of the client is prohibited. To purchase additional licenses, contact your Axis reseller. H.264 can, without compromising image quality, reduce the size of a digital video file by more than 80% compared to the Motion JPEG format and by as much as 50% compared to the MPEG-4 standard. - Page 19 AXIS Q16 Network Camera Series Learn more How do Image, Stream, and Stream profile settings relate to each other? The Image tab contains camera settings that affect all video streams from the product. If you change something in this tab, it immediately affects all video streams and recordings.
-
Page 20: Applications
Actual average bitrate Applications AXIS Camera Application Platform (ACAP) is an open platform that enables third parties to develop analytics and other applications for Axis products. To find out more about available applications, downloads, trials and licenses, go to axis.com/applications. -
Page 21: Axis Video Hosting System (Avhs)
One-click enabled - Press and hold the product’s control button (see Product overview on page 25) for about 3 seconds to connect to an AVHS service over the Internet. Once registered, Always will be enabled and the Axis product stays connected to the AVHS service. -
Page 22: Troubleshooting
AXIS Q16 Network Camera Series Troubleshooting Troubleshooting If you can’t find what you’re looking for here, try the troubleshooting section at axis.com/support. Reset to factory default settings Important Reset to factory default should be used with caution. A reset to factory default resets all settings, including the IP address, to the factory default values. -
Page 23: Technical Issues, Clues And Solutions
Axis device. Check all cabling and reinstall the device. Possible IP address conflict The static IP address in the Axis device is used before the DHCP server sets a dynamic address. with another device on the... -
Page 24: Performance Considerations
Heavy network utilization due to poor infrastructure affects the bandwidth. • Viewing on poorly performing client computers lowers perceived performance and affects frame rate. • Running multiple AXIS Camera Application Platform (ACAP) applications simultaneously may affect the frame rate and the general performance. -
Page 25: Specifications
AXIS Q16 Network Camera Series Specifications Specifications To find the latest version of the product’s datasheet, go to the product page at axis.com and locate Support & Documentation. Product overview Top cover Sunshield Sunshield adjustment screws Network camera Heater Wall mount... - Page 26 AXIS Q16 Network Camera Series Specifications Network connector (PoE in) PoE class LED IK10 tool Network connector (PoE out) Cold startup delay switch (Pos 1: Startup -20°, Pos 2: Startup: 0°) Camera housing communication cable Camera heater Safety hook anchor...
-
Page 27: Led Indicators
AXIS Q16 Network Camera Series Specifications LED Indicators Note • The Status LED can be configured to be unlit during normal operation. To configure, go to Settings > System > Plain config. • The Status LED can be configured to flash while an event is active. -
Page 28: Sd Card Slot
• Risk of data loss and corrupted recordings. Do not remove the SD card while the product is running. Unmount the SD card from the product’s webpage before removal. This product supports microSD/microSDHC/microSDXC cards. For SD card recommendations, see axis.com. -
Page 29: Buttons
AXIS Q16 Network Camera Series Specifications microSD, microSDHC, and microSDXC Logos are trademarks of SD-3C LLC. microSD, microSDHC, microSDXC are trademarks or registered trademarks of SD-3C, LLC in the United States, other countries or both. Buttons Control button The control button is used for: •... - Page 30 AXIS Q16 Network Camera Series Specifications I/O connector Use the I/O connector with external devices in combination with, for example, motion detection, event triggering, and alarm notifications. In addition to the 0 V DC reference point and power (DC output), the I/O connector provides the interface to: Digital input - For connecting devices that can toggle between an open and closed circuit, for example PIR sensors, door/window contacts, and glass break detectors.
- Page 31 AXIS Q16 Network Camera Series Specifications • Two-wire RS485 half duplex • Four-wire RS485 full duplex • Two-wire RS422 simplex • Four-wire RS422 full duplex point to point communication Function Notes RS485B alt RS485/422 RX(B) RX pair for all modes (combined RX/TX for 2-wire RS485)
- Page 32 User Manual Ver. M6.2 AXIS Q16 Network Camera Series Date: February 2020 © Axis Communications AB, 2017 - 2020 Part No. T10115609...