Table of Contents
Advertisement
AXIS Q16 Network Camera Series
Additional settings
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select Hold current.
Maximize details in an image
Important
If you maximize details in an image, the bitrate will probably increase and you might get a reduced frame rate.
•
Make sure to select the capture mode that has the highest resolution.
•
Set the compression as low as possible.
•
Select MJPEG streaming.
•
Turn off Zipstream functionality.
Stabilize a shaky image with Electronic Image Stabilization (EIS)
Electronic Image Stabilization (EIS) can be used in environments where the product is mounted in an exposed location and subject to
vibrations, for example, wind or passing traffic. Turn on EIS to get a smoother and steadier image without blur.
EIS also reduces the file size of the compressed image and lowers the bitrate of the video stream.
Note
When EIS is turned on the image is cropped slightly, lowering the maximum resolution.
1. Go to Settings > Image > Image correction.
2. Turn on EIS.
Compensate for barrel distortion
Barrel distortion is a phenomenon where straight lines appear increasingly bent closer to the edges of the frame. A wide field of view
often creates barrel distortion in an image. Barrel distortion correction compensates for this distortion.
Note
Barrel distortion correction affects the image resolution and field of view.
1. Go to Settings > Image > Image correction.
2. Turn on Barrel distortion correction (BDC).
3. Set the level of correction that gives you the best image.
Improve facial recognition
To better recognize the face of a person passing by the camera, you can set the optimal pixel resolution with the camera's pixel
counter.
8
Advertisement
Table of Contents
