Table of Contents
Advertisement
AXIS Q16 Network Camera Series
Additional settings
4. Select units (metric or imperial).
5. Enter the values for Road distance, Camera height, Vehicle distance and Max speed.
6. To make both dark and bright areas of the image visible, turn on WDR.
7. Set the level of low-light gain depending on the light conditions.
8. If external IR illumination is available, select the Supplemental IR illumination checkbox.
9. Click Save.
10. Go to System > Orientation.
11. Select Traffic overview under Scene profile.
12. Click Done.
Handle scenes with strong backlight
Dynamic range is the difference in light levels in an image. In some cases the difference between the darkest and the brightest
areas can be significant. The result is often an image where either the dark or the bright areas are visible. Wide dynamic range
(WDR) makes both dark and bright areas of the image visible.
1. Go to Settings > Image > Wide dynamic range.
2. If required, turn on WDR.
3. Use the Contrast slider to adjust the amount of WDR.
Note
WDR may cause artifacts in the image.
Image without WDR.
Image with WDR.
10
Advertisement
Table of Contents
