Table of Contents
Advertisement
AXIS Q16 Network Camera Series
Specifications
LED Indicators
Note
• The Status LED can be configured to be unlit during normal operation. To configure, go to Settings > System > Plain config.
• The Status LED can be configured to flash while an event is active.
Status LED
Green
Amber
Note
The Network LED can be disabled so that it does not flash when there is network traffic. To configure, go to Settings
> System > Plain config.
Network LED
Green
Amber
Unlit
Note
The Power LED can be configured to be unlit during normal operation. To configure, go to Settings > System > Plain config.
Power LED
Green
Amber
Status LED behavior for focus assistant
Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
The status LED flashes when the Focus Assistant is active.
Color
Red
Amber
Green
Buzzer signal for focus assistant
Note
Only valid for optional P-iris, DC-iris or manual iris lenses.
Indication
Steady green for normal operation.
Steady during startup. Flashes when restoring settings.
Indication
Steady for connection to a 100 Mbit/s network. Flashes for network activity.
Steady for connection to a 10 Mbit/s network. Flashes for network activity.
No network connection.
Indication
Normal operation.
Flashes green/amber during firmware upgrade.
Indication
The image is out of focus.
Adjust the lens.
The image is close to focus.
The lens needs fine tuning.
The image is in focus.
27
Advertisement
Table of Contents
