Advertisement
Table of Contents
ASSEMBLY INSTRUCTION
(for connecting the wire of the light on this cabinet)
Item# 5960-75906-MULTI Sattler Display Cabinet
*** Caution: Please read all instructions carefully before starting the assembly process.
Please note this cabinet can be used alone with can light on by a touch dimmer. Also,
when two or more are bunched together, you can control all can lights by touching one
dimmer.
Diagram 1
Diagram 2
Assembly Steps:
1. When each piece of cabinet is used alone, attach male connector of the power switch (A) to a
wall plug. (See Diagram 1)
1/2
Advertisement
Table of Contents
Related Manuals for Hooker Furniture 5960-75906-MULTI
Summary of Contents for Hooker Furniture 5960-75906-MULTI
- Page 1 ASSEMBLY INSTRUCTION (for connecting the wire of the light on this cabinet) Item# 5960-75906-MULTI Sattler Display Cabinet *** Caution: Please read all instructions carefully before starting the assembly process. Please note this cabinet can be used alone with can light on by a touch dimmer. Also, when two or more are bunched together, you can control all can lights by touching one dimmer.
- Page 2 2. Touch dimmer is at the inside of right post. 3. If you want to bunch two or more cabinets together, place them all side by side in a desired location. 4. Leave male connector of the can light (C) and female connector of power switch (B) for the first cabinet (#1) as it is.
Need help?
Do you have a question about the 5960-75906-MULTI and is the answer not in the manual?
Questions and answers