Appendix 8: Secondary Air Tubes And Baffle Installation - Empire Comfort Systems St.Clair 3000 Installation And Operation Manual

APPENDIx 8: SECONDARY AIR TUBES AND BAFFLE INSTALLATION

1. Starting with the rear tube, lean and insert
the right end of the secondary air tube into
the rear right channel hole.
insert the left end of the tube into the rear
left channel.
Note that secondary air tubes (A) can be replaced without removing the baffle board (B).
Installation and Operation Manual - St. Clair 3000
Then lift and
2. Align the notch in the left end of the tube
with the key of the left air channel hole.
Using a «Vise grip» hold the tube and lock
it in place by turning the tube as shown.
Make sure the notch reaches the end of
the key way.
3. Repeat for center back tube.
4. Put the baffle in place.
5. Repeat steps 1 and 2 for the two front
tubes.
6. To remove the tubes use the above steps in
reverse order.
Page 61