APPENDIx 9: BLOWER REPLACEMENT
To facilitate the blower replacement, it is recommended to remove the faceplate first. Refer
to the faceplate installation manual for more details.
1.
Take off the faceplate
3.
Unplug the wires and unplug the blower's electric wires (P) and (Q).
4.
Repeat the steps in reverse order to reinstall the blower.
Page 62
2.
Cut the ty-rap. Lift the blower (A) located
under the firebox towards the back. Turn
90° to pull out.
Installation and Operation Manual - St. Clair 3000