Table of Contents
Advertisement
APPENDIx 1: INSTALLING THE DOOR OVERLAY
In order to complete the assembly of your St. Clair 3000 wood fireplace, you need to install the
door overlay. See figure below for installation instructions:
Position the overlays on the door frames and secure them from the inside of the doors using the
8 included nuts.
To facilitate the installation, do not tighten the nuts until they are all installed.
Note: It is not necessary to remove the glass or any other component to install the overlay.
11/32
Page 50
Installation and Operation Manual - St. Clair 3000
Advertisement
Table of Contents
