Advertisement
Quick Links
π
H-4292, H-4293
STEEL PEGBOARD
• ALWAYS wear safety glasses when using any
power tool.
• ALWAYS use hearing protection when using loud
equipment.
• DO NOT sit, climb, hang or step on hooks or holders.
SUGGESTED TOOLS
• 24" Level
• Tape Measure
• Pencil
• Chalk Line
• Drill with #2 Phillips Screwdriver Attachment
SUPPLIES
#6 wood screws, 1½" to 2", with anchors.
PAGE 1 OF 2
1-800-295-5510
uline.com
SAFETY
• DO NOT overload hooks or holders.
• DO NOT try to install pegboard panels by yourself.
Use two or more people.
INFORMATION
GENERAL
1.
Install over studs, plaster or drywall.
2. Snap chalk line at desired height on wall.
NOTE: Screws may not always anchor into a
stud.
3. Mark all holes on wall before hanging pegboard.
NOTE: If hanging multiple pegboards,
mark ALL holes first.
0317 IH-4292
Advertisement
Related Manuals for U-Line H-4292
Summary of Contents for U-Line H-4292
- Page 1 π H-4292, H-4293 1-800-295-5510 uline.com STEEL PEGBOARD SAFETY • ALWAYS wear safety glasses when using any • DO NOT overload hooks or holders. power tool. • DO NOT try to install pegboard panels by yourself. • ALWAYS use hearing protection when using loud Use two or more people.
- Page 2 3. Pre-drill holes in wall if using anchors. NOTE: Use a 1/4" drill bit when using the H-4294 Steel Pegboard Mounting Hardware or the H-4292 Steel Pegboard Starter Kit. 4. Remove pegboard from wall. Insert anchors into holes in wall.