Operation Of Tilting Operator's Cab; Operating Method; Notes On Operation - XCMG QAY220 Operation Manual

QAY220 All Terrain Crane Operation Manual

4-8 Operation of tilting operator's cab

4-8-1 Operating method

Press the upper end of the operator's cab tilting switch on the instrument panel in the operator's
cab, the cab will tilt upward. Press the lower end of the switch, the cab will lower down. The max.
tilting angle is 23°.

4-8-2 Notes on operation

1. Tilt the operator's cab slowly, and it's better to let the engine run at idle.
2. During travelling, make sure the operator's cab is located in horizontal condition.
Fig. 4-13 Operation of tilting operator's cab
Chapter 4
Crane operation
4-21
Courtesy of CraneMarket.com