Installation Of The Weight - XCMG QAY220 Operation Manual

QAY220 All Terrain Crane Operation Manual

5-6-3 Installation of the weight

1. The mounting position of the over-wind cutout device weight is determined by the position in
which the rope socket is attached, the anchor on the boom or that on the hook block.
Mount the weight on the part of line with the
rope socket.
2. Make sure that the winch rope is wound neatly.
3. During traveling, fasten the wire rope end to the drum with wire to prevent disorder.
5-6-4 Cautions in handling winch rope
1. When winding a new wire rope on the winch drum, take care not to twist the rope.
2. After installing a new wire rope on the winch drum, repeat hoist up and down a load of 10%
rated load several times.
3. Inspect and discard wire rope according to GB/T5972-2009 Cranes-Wire ropes-Care,
maintenance, installation, examination and discard.
4. Imported rotation-resistant rope is used for the crane. In general, it will not rotate. In case the
winch rope becomes twined, correct it as follows:
Mount the weight on the part of line that is
next to the rope-socketed one.
Chapter 5
5-27
Accessories
Courtesy of CraneMarket.com