QAY220 All Terrain Crane Operation Manual
4-2 Operation of PTO
4-2-1 Engaging PTO
Start engine, and then press PTO switch to
engage the PTO.
In winter, let the hydraulic pump run for 15~20 minutes for warming up.
4-2-2 Disengaging PTO
Reset PTO switch to disengage the PTO. Stop the engine. Turn the starting key to position OFF.
Before engaging PTO, make sure that all
control buttons of chassis are in original state.
Air pressure is more than 0.45Mpa.
Fig. 4-4 PTO switch
Chapter 4
Crane operation
4-5
Courtesy of CraneMarket.com