Toro GrandStand 72520 Operator's Manual page 31

Mower with 60in turbo force cutting unit
Table of Contents

Advertisement

Changing the Engine Oil and Filter
Service Interval: Every 100 hours or yearly,
whichever comes first
Note:
Dispose of the used oil at a recycling center.
1.
Park the machine so that the drain side is slightly
lower than the opposite side to assure the oil
drains completely.
Figure 39
2.
Disengage the PTO, move the motion-control
levers to the N
engage the parking brake.
3.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
4.
Change the engine oil as shown.
g403449
g373146
5.
Change the engine-oil filter as shown.
Note:
Ensure that the oil-filter gasket touches
the engine and then turn the filter an extra 3/4
turn.
31
-
position, and
EUTRAL
LOCK
Figure 40
g403449
g403463

Advertisement

Table of Contents
loading

Table of Contents