Operating The Mower-Blade-Control Switch (Pto) - Toro GrandStand 72520 Operator's Manual

Mower with 60in turbo force cutting unit
Table of Contents

Advertisement

Operating the
Mower-Blade-Control
Switch (PTO)
Use the blade-control switch (PTO) in conjunction with
the motion-control levers to engage and disengage
the mower blades.
DANGER
The rotating blades under the mower deck are
dangerous. Blade contact will cause serious
injury or death.
Do not put your hands or feet under the mower
or mower deck when the blades are engaged.
DANGER
An uncovered discharge opening allows
objects to be thrown toward you or
bystanders. Also, contact with the blade
could occur. Thrown objects or blade contact
will cause serious injury or death.
Do not operate the mower with the discharge
deflector raised, removed, or altered unless
a grass collection system or mulch kit is in
place and working properly.
Engaging the Mower Blades (PTO)
Figure 9
Disengaging the Mower Blades
(PTO)
Disengage the mower blades using 1 of the 2 ways
shown.
Note:
If you disengage the mower blades by
releasing the motion-control levers, you do not need
to move the blade-control switch to the O
before engaging the blades again.
g301277
15
Figure 10
Figure 11
position
FF
g301401
g031593

Advertisement

Table of Contents
loading

Table of Contents