VTech A2211-FSK User Manual page 18

Volume
Listening volume and ringer volume can be
adjusted.
Adjust the listening volume
During a call, press +/VOLUME or -/VOLUME
to adjust the listening volume. The next call
returns to the default listening volume.
Adjust the ringer volume
At any time, slide the RINGER VOL switch on
the right side of the telephone base to adjust
the ringer volume.
Call waiting
1. When you hear a call waiting tone during
a call, press FLASH on the handset to put your
current call on hold and take the new incoming
call.
2. Press FLASH or the switch hook once
rapidly at any time to switch back and forth
between calls.
Mute
Mute the microphone
1. During a call, press MUTE on the handset.
The MUTE LED flashes in red when the mute
function is turned on. You can hear the party on
the other end but they cannot hear you.
2. Press MUTE to resume the conversation.
The MUTE LED turns off.
Hold
When a call is placed on hold, any parallel
phone that tries to use the same phone line will
take the call off hold and pick the call.
Place a call on hold
1. During a call, press HOLD on the
telephone base to place that call on hold. The
respective line key illuminates in red when the
call is placed on hold.
2. To release the call on hold, lift the corded
handset if the line key on hold is depressed,
or press the line key on hold if no line keys are
depressed. The respective line key illuminates
in orange when in use. When both lines are on
hold, lift the corded handset releases the call
on line 1.
Data port
The data port routes to line 2.
EN - 18