Advertisement
Available languages
Available languages
4.3.16 Cancelling the programme
To cancel the programme, turn the Programme Selection knob to select another programme. Previous
programme will be cancelled. End/Cancel light will flash continuously to notify that the programme has been
cancelled.
When you turn the Programme Selection knob, the machine will end the programme but will not discharge the
water inside. When you select and start a new programme, the newly selected programme will start depending
on the step the previous programme was cancelled in. For example, the machine may take in additional water or
continue to wash with the water inside.
C
INFORMATION
• Depending on the step where the programme was cancelled in, you may have to add
detergent and softener again for the programme you have selected anew.
4.3.17 End of programme
At the end of the programme, "End" will be displayed.
1. Wait until the light of the loading door goes off completely.
2. Switch the programme selection knob to On/Off to switch off the machine.
3. Take out your laundry and close the loading door. Your machine is now ready for the next washing cycle.
4.3.18 Your machine has the "Pause Mode" function.
After using the On/Off button to switch on the machine, if you do not start any programme in the selection
step or do not perform anything else, or if you do not do anything in 10 minutes after the selected programme
has ended, the machine will automatically switch to energy saving mode. Also, if your product has a display
that shows programme time, this display will completely turn off. If you turn the Programme Selection knob or
touch any button, the lights and the display will switch back to the previous position. The selections you make
when exiting the energy efficiency mode may change. Check if your selections are correct before starting the
programme. If necessary, make adjustments again. This is not an error.
24 / EN
Washing Machine / User's Manual
Advertisement
