Setting The Paper - Star Micronics TSP212 User Manual

1-1. Setting the Paper

Prepare a roll of paper. Make sure that the feeding edge of the paper is cut in a
straight right angle to the direction of feed.
Roll paper
1. SETTING THE PAPER
1 Open the cover.
2 If the unit has an auto-cutter unit,
3 Widen the paper holder in the direc-
Core
Axis
Paper roll holder
– 1 –
move the unit in the direction of the
arrow until the lock engages. (This
step is unnecessary if there is no
auto-cutter unit.)
tion of the arrow and position the
paper in the manner shown in the
illustration. Make sure that the core
of the paper is firmly held by the
paper holder at this time.