Travis Industries Fire Garden 94900432 Manual page 20

20

Use wire nuts to
connect the wires from
the 24VAC transformer
to the yellow and the
yellow/white striped
wires on the control
module (polarity does
not matter for this
connection). When the
connections are secure,
coil the wires and push
them back into the
electrical box.

Set the burner assembly into the
enclosure. Take care not to scratch the
powder coat on the enclosure.

Reinstall the screws that secure the burner
assembly into the enclosure.
© Travis Industries, Inc.
Installation
10/26/23 - 1579
(qualified installers only)
Make sure wires are in the
electrical box under the burner tray.
This will ensure they do not touch
anything hot.
Outdoor Complete Linear Fire Pits