Install The Firewall Using A Lift - Juniper SRX5600 Manual

Install the Firewall Using a Lift

To install the firewall using a lift:
1. Ensure that the rack is in its permanent location and is secured to the building. Ensure that the
installation site allows adequate clearance for both airflow and maintenance. For details, see the
SRX5600 Firewall Hardware Documentation at www.juniper.net/documentation/.
2. Load the firewall onto the lift, making sure that it rests securely on the lift platform (see
page 10).
Figure 6: Load the Firewall onto the Lift
10
Figure 6 on