Changing The Mapping (Exc-F Six Days); Adjusting The Idle Speed - KTM 250 EXC-F SIX DAYS 2022 Owner's Manual

17 TUNING THE ENGINE
17.4
17.5
132
Changing the mapping (EXC‑F Six Days)
Warning
Voiding of the government approval for road use and the insurance coverage If the combination switch is
mounted, the vehicle's road permit, if any, expires.
–
Only operate the vehicle in closed-off areas remote from public road traffic if the combination switch
is installed.
Info
The desired engine characteristic can be activated via the MAP button on the combination switch.
The setting most recently selected is activated again when restarting.
The traction control can also be activated in each mapping using the TC button.
The mapping can also be changed during the ride.
H02889-01
H02886-01

Adjusting the idle speed

Warning
Danger of accidents The engine may go out spontaneously if the idle speed is set too low.
–
Set the idle speed to the specified value. (Your authorized KTM workshop will be glad to help.)
Activating STANDARD mapping:
–
Press button MAP until LED 1 lights up.
Guideline
Engine speed
STANDARD – balanced response
Activating ADVANCED mapping:
–
Press button MAP until LED 2 lights up.
Guideline
Engine speed
ADVANCED – direct response
< 4,000 rpm
< 4,000 rpm