Servicing the Air Cleaner (continued)
1. Rotate the latches
2. Remove the cover
elements.
3. Remove the cover to access the air-cleaner
elements.
4. Remove the foam element
element
5. Service the foam element
A. Wash the foam element in warm water and
detergent.
B. Rinse it and allow it to air dry.
C. Lightly oil the foam element with new oil
and squeeze out excess oil.
6. Service the paper element
Gently tap the paper element to dislodge dirt.
Note:
use pressurized air, as this damages the
element.
Note:
carefully; do not use if the sealing surfaces are bent or damaged.
7. Install the elements.
A. Install the foam element onto the paper element.
B. Install the elements onto the air-cleaner base.
C. Install the cover, and secure it with the latches.
Engine Oil Service
Engine Oil Specifications
Crankcase capacity:
Oil type:
Oil viscosity:
Maintenance: Engine Maintenance
outward.
to access the air-cleaner
from the paper
.
.
.
Do not wash the paper element or
Replace a dirty, bent, or damaged element. Handle the new element
1.9 L (64 fl oz)
API classification SJ or later.
Selected the oil viscosity according to ambient temperature in
the table below.
G376312
Page 5–7
3451-708 A