Samsung ML-1755 Service Manual page 50

6.3 Clearing Paper Jams
Occasionally, paper can be jammed during a print job. Some of causes include:
• The tray is loaded improperly or overfilled.
• The tray has been pulled out during a print job.
• The front cover has been opened during a print job.
• Paper that does not meet paper specifications has been used.
• Paper that is outside of the supported size range has been used.
If a paper jam occurs, the On Line/Error LED on the control panel lights red. Find
and remove the jammed paper. If it is invisible, look inside the printer.
6.3.1 In the Paper Exit Area (JAM2)
1) If the paper jams as it exits to the output
tray and a long portion of the paper is
visible, pull the paper straight out.
When you pull the jammed paper, if there is
resistance and the paper does not move
immediately, stop pulling. Continue with the
next step.
2) Open the rear output tray.
Samsung Electronics
ALIGNMENT & A D J U S T M E N T S
3) Loosen the paper if it is caught in the
feed rollers. Then pull the paper gently
out.
Note: Please be careful when you open the rear cover. The
inside of the printer is still hot.
4) Close the rear output tray. Open and
close the front cover. Printing can be
resumed.
Training Manual
6-7