5.12 Feed Roller
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- Drive Ass'y(see page 5-7)
2. Pull up the Feed Idle Bush and Feed Idle Shaft,
as shown below.
Feed Idle
Shaft
Bush
3. Remove three screws from the Feed Bracket
and take it out.
Feed Bracket
4. Remove the Idle Gear and Feed Gear2.
Feed Gear2
Idle Gear
Samsung Electronics
Disassembly and Reassembly
5. Remove the Feed Gear 1 Ass'y, as shown
below.
Feed Gear1
Ass'y
6. Remove the Feed Roller and Feed Roller 1, as
shown below.
Feed Roller
Feed Roller1
Training Manual
5-11