Samsung ML-1755 Service Manual page 37

Disassembly and Reassembly
5.4 Exit Roller
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
2.Remove the Exit Gear, Bearing and Exit Roller
as shown below
5.5 LSU
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
2. Remove two screws and unplug one connector
from the Frame.
3. Remove the LED PBA Ass'y as shown below.
Training Manual
5-6
LED PBA Cover
Exit Gear
Bearing
1
2
4. Unplug two connector from the LSU
5. Unplug four screws and take the LSU out.
Exit Roller
LSU
Samsung Electronics