Samsung ML-1755 Service Manual page 41

Disassembly and Reassembly
5.11 Transfer Roller
1. Before you remove the Fuser, you should
remove:
- Top Cover(see page 5-2)
- LSU(see page 5-6)
2. Remove three screws and take the Transfer
Earth out.
Transfer
Earth
Training Manual
5-10
3. Unplug the PTL Holder Connector, then remove
the PTL Holder and PTL Lens, as shown below.
PTL
PTL Lens
Holder
4. Unlatch the Bush and remove it. Then lift the
Transfer Roller out, as shown below.
Transfer
Roller
Bush
Samsung Electronics