Replacing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Procedure
1
Using the alignment posts, place the I/O board on the palm-rest assembly and
snap the I/O board into place.
2
Slide the I/O-board cable into its connector on the I/O board and close the latch
to secure the cable.
3
Replace the screw (M2x3) that secures the I/O board to the palm-rest assembly.
Post-requisites
1
Follow the procedure from step 2 to step 8 in
2
Replace the keyboard.
3
Follow the procedure from step 4 to step 5 in
4
Replace the battery.
60
computer. After working inside your computer, follow
After working inside your
computer. For more safety best
www.dell.com/
"Replacing the base
"Replacing the optical
Before
cover".
drive".