Disposal Of Packaging Materials; Assembling The Appliance - Silvercrest SDM 1500 C2 Operating Instructions Manual

Disposal of packaging materials

The packaging protects the appliance from damage during transport . The packaging
materials have been selected for their environmental friendliness and ease of
disposal, and are therefore recyclable .
Returning the packaging into the material cycle conserves raw materials and
reduces the amount of waste generated . Dispose of packaging materials that
are no longer needed in accordance with applicable local regulations .
NOTE
► If possible, keep the appliance's original packaging during the warranty
period so that the appliance can be packed properly for return shipment
in the event of a warranty claim .
Note the labelling on the packaging and separate the packaging material compo-
nents for disposal if necessary . The packaging material is labelled with abbreviations
(b) and numbers (a) with the following meanings:
1–7: Plastics
20–22: Paper and cardboard
80–98: Composites

Assembling the appliance

♦ Push the main unit 3 onto the connection nozzle 4 on the steam foot 5 and
press the main unit 3 down until the round catch clicks into place .
♦ Select the appropriate pad 6/o for the surface being cleaned:
–
the blue pad o for sensitive surfaces, such as parquet flooring,
–
the white pad 6 for more robust surfaces, such as tiled floors .
♦ Attach a pad 6 from below onto the steam foot 5 .
NOTE
► If you intend to clean carpeting with the steam mop, fit the steam foot 5
onto the carpet ring p . Ensure that the carpet ring unlocking aid a is in
line with the connection nozzle 4 . Push the steam foot 5 onto the carpet
ring p so that it clicks audibly into place . This will allow the pad 6/o to
glide over the carpet .
► To remove the carpet ring p, press your foot onto the carpet ring release
aid a and pull the steam foot 5 carefully off the carpet ring p .
■ 44 │ GB │ MT SDM 1500 C2