Operating Instructions; Initial Start-Up - Atlas Copco GA 75+ Instruction Book

8

Operating instructions

8.1

Initial start-up

Preparations
1. Consult the sections
2. The following transport fixtures, painted red, must be removed:
• Bolts or bolts and bushes under the oil separator vessel (1)
• Bolts and bushes under the gear casing (2)
• Bolt and bushes or support under the motor (3)
160
The operator must apply all applicable
For the location of the air outlet valve and the drain connections, see sections
and Condensate system.
Electrical cable size,
Safety precautions.
Installation proposal and
Instruction book
Dimension drawings.
2920 7109 60
Introduction