Mounting The Speaker To The Sam Bracket - Electro-Voice EVID 4.2 Installation Manual

10 en | Installation
EVID 6.2T and The power taps are 60 W, 30 W and 15 W at both 70.7 V and 100 V, with a 7.5 W tap for 70.7 V
EVID 6.2TW only, as well as an 8 Ohm transformer bypass setting.
3.3

Mounting the speaker to the SAM bracket

Figure 3.3: Tighten socket head bolts
1.
2.
3.
4.
5.
Model
EVID 4.2 models
2023-07 | 04 | F.01U.177.642
Attach the speaker to the SAM™ bracket with bolt B.
Adjust the horizontal position of the speaker.
Tighten the locking bolt A with an Allen wrench (supplied).
If available, use an Allen wrench with a longer handle to make it easier to apply the
necessary force to achieve the recommended torque. Refer to Recommended torque
settings for bolts A and B.
Adjust the vertical angle of the speaker.
Tighten the locking bolt B with an Allen wrench (supplied).
If available, use an Allen wrench with a longer handle to make it easier to apply the
necessary force to achieve the recommended torque. Refer to Recommended torque
settings for bolts A and B.
15° angle markers
Torque
30-50 in-lbs (3.4-5.2 N-m)
Installation manual
EVID Surface-mount loudspeakers
Bolt A
(swing)
Bolt B
(rotation)
Bosch Security Systems, LCC