TOHATSU M 4C Owner's Manual page 42

42
REMOVING AND CARRYING THE OUTBOARD MOTOR
When transporting a boat on a trailer
with the outboard motor still attached,
disconnect the fuel line from the out-
board motor beforehand and keep the
outboard motor in the vertical or on a
transom saver bar.
Tiller handle type
While transpor ting outboard motor
attached to the boat on a trailer, properly
tighten the steering friction bolt to pre-
vent the outboard motor from moving
(page 43).
2
1
8
ENOF00074-B
1. Ground clearance should be provided
sufficiently.
2. Transom saver bar
ENOW00067-0
WARNING
Do not go under outboard motor tilted up
even if it is supported by support bar, or
accidental fall of outboard motor could lead
to severe personal injury.