TOHATSU M 4C Owner's Manual page 31

1. Remove the top cowl.
2. Disconnect the linkage of the starter
lock rod.
3. Remove the bolts (3 pcs) and remove
the recoil starter.
4. Insert the knotted end of the starter
rope into the notch in the flywheel
and wind the rope clockwise around
the flywheel several turns.
ENOF02119-0
5. Tie a loop to other end of the emer-
gency starter rope and attach socket
wrench that is included in the tool kit.
ENOW00860-0
Be sure to keep the harness away from the
rotation parts.
6. Be sure to install the stop switch lock
to the stop switch, and attach the
stop switch lanyard securely to the
ENOF02120-0
operator or to the operator's PFD
(Personal Flotation Device.)
7. Set the control lever in the Neutral
position.
8. Pull the starter handle slowly until you
feel engagement, keep pulling till you
feel less resistance, then pull it
quickly.
ENOF02121-0
ENGINE OPERATION
ENOF02222-0
CAUTION
ENOF02123-0
31
7