Delfin DM32BL Operator And Maintenance Manual page 34

➢ Remove pin (A) and split-pin (B) that lock the filter on the shaking lever from under the vacuum
cleaner.
Lift the complete support filter.
➢
➢ Loosen the clamp and remove the support ring with seal.
Remove the knots and take out the pocket filter. Fit the new filter and put everything back in
➢
place, locking the cap.
Important!
All the material trapped by the filter and the filter itself must be disposed of through authorised
channels in the country where the vacuum cleaner is used.
A
- 31 -EN
Maintenance Section
B