4.4
Replacing the filters
To replace the filters, proceed as follows:
Turn off the vacuum cleaner by pressing the motor
➢
Disconnect the vacuum cleaner plug from the power socket.
➢
Important!
Wear individual protection devices.
Release the retainers that hold the motor head in place. Lift the motor head and rest this on
➢
a flat surface being careful not to damage the power cable.
Lift the safety lock and the container release lever to release and remove the container.
➢
STOP
buttons.
- 30 -EN
Maintenance Section
Need help?
Do you have a question about the DM32BL and is the answer not in the manual?