Safety Section
2.2
Safety warnings
Attention!
The following indications are, by themselves, not enough to fully protect against all the hazards
that could arise during vacuum cleaner operation. These will have to be integrated with common
sense and the experience of the operator, both of which are crucial factors for preventing
accidents. Each section of this manual lists further specific safety warnings for the various
operations.
Maintenance jobs must always be performed with the power plug detached from the power
point.
The employer must inform and train the user according to the provisions of applicable laws.
Before using the machine, prepare and train yourself by reading this manual carefully. Use of the
machine by untrained and unauthorised persons is forbidden.
Using the machine to vacuum toxic substances is forbidden unless this has been equipped with
special filters required for the specific type of dusts. Such filters must be explicitly requested by
you.
If the machine is used to vacuum toxic-harmful substances, the container must be emptied and
the filters cleaned using adequate individual protection devices, selected according to the type of
substances to be vacuumed.
Do not vacuum flammable materials or substances or which could cause explosions (fuels,
solvents, etc.). To vacuum such materials, the machine must be built with Anti-explosion Motor
and Electric System and this must be requested by you explicitly.
Do not vacuum corrosive substances unless the machine is equipped with containers suitable for
Stainless-steel AISI 304
this purpose (
).
Use of the machine without the supplied filters is not recommended.
If the filters are correctly fitted, the machine will not eject any objects.
Never rest miscellaneous materials on the horizontal protection guard.
The machine casing containing moving parts must not be removed by the user.
When using the machine, mind other people, especially children.
Use the machine cautiously on slopes and ramps.
Do not change direction on gradients.
Make sure the parked machine remains stable by operating the braked wheel.
During cleaning operations, maintenance jobs or when changing parts, the starter switch must be
off and the machine must be disconnected from the power mains by removing the cable from the
socket.
Only skilled persons should carry out repairs.
- 12 -EN
Need help?
Do you have a question about the DM32BL and is the answer not in the manual?