Table of Contents
Advertisement
A
Appendix - Accessories
Output power regulator kit for modulating operation
With the modulating operation, the burner continually adapts the
power to the heat request, ensuring a high level of stability for the
parameter controlled: temperature or pressure.
Burner
RX 700-850-1000S/PV
Burner
RX 700-850-1000S/PV
Software diagnostics kit
A special kit is available that, by an optical link to a PC, shows the
burner life together with operating hours, type and number of
lockouts, number of motor rpm's and safety parameters.
To view diagnostics, proceed as follows:
connect the kit (supplied separately) to the appropriate
socket on the control box. Reading of the information begins
when the software programme included in the kit starts.
The installer is responsible for the addition of any
safety device not foreseen in this manual.
WARNING
Burner
RX 700-850-1000S/PV
20152192
Appendix - Accessories
Output regulator
RWF50.2
Probe
Temperature PT 100
Pressure 4 ÷ 20 mA
Pressure 4 ÷ 20 mA
Pressure 4 ÷ 20 mA
Code
on demand
68
Two components should be ordered:
–
the output power regulator to be installed on the burner;
–
the probe to install on the heat generator.
Code
20094733
Adjustment field
- 100 ÷ 500° C
0 ÷ 2,5 bar
0 ÷ 16 bar
0 ÷ 25 bar
GB
Code
3010110
3010213
3010214
3090873
Advertisement
Table of Contents
