Error During The Reset Process; Reset - Riello 20148874 Installation, Use And Maintenance Instructions

9.4.1

Error during the reset process

Alternatively
with
or
or
NOTE:
During the restore process, all the parameters and settings are
written from the program module onto the memory integrated into
the device. During this process it is possible that the previous pro-
gram sequences, the parameters and the settings in the internal
memory could be overwritten!
9.4.2

Reset

nfo
> 1s
NOTE:
For the meaning of the diagnostic codes and errors, see the
chapter "List of error codes with operation using AZL21... Dis-
play" on page 60.
20152192
Operation, indications, diagnostic
The display shows rSt and Er1, Er2 or Er3.
For the meaning of the possible cause, see the chapter "List of error codes with operation using
AZL21... Display" on page 60
nfo
Pressing for 1...3 seconds displays OFF.
When the button is released the unit has been reset.
64 GB
Tab. AA
Tab. AB