3.
Adjust Display Mount Position
C
Slide the display mount panel into the desired height position. Remove lift-panels necessary, see below.
Position display mount panel to the desired height by aligning the two top screws to the appropriate
holes in the post and tighten all four screws.
Removing Lift-Off Panels
Lift panels up and off, leaving the lift off panel screws.
Remove the panel lock thumb screws on the lift-off
panels from the backside of unit.
Strut 170 Wall Stand Designed for Microsoft Surface 2S 50"
501-760-MS v1.23
page 4 of 8