Advertisement
3.
Adjust Display Mount Position
Loosen two bottom screws TWO full rotations and two top panel screws about SEVEN rotations.
A
Do not completely remove the screws from the flat nuts.
B
Slide display mount panel along the posts in
incremental height positions of 1.82".
See Step 3C to place display mount panel
further down the posts.
Position display mount panel to the desired height
by aligning the two top screws to the appropriate
holes in the post and tighten all four screws.
Strut 170 Wall Stand Designed for Microsoft Surface 2S 50"
PRO TIP: This process is done easier by
laying the Strut 170 on a horizontal surface
Top Screw
Bottom Screw
501-760-MS v1.23
page 3 of 8
Advertisement
