Table of Contents
Advertisement
Conducting calls – enhanced functions
Step-by-Step
D E
User 1
...
Record
28
All manuals and user guides at all-guides.com
Deactivating speakerphone mode
You can deactivate speakerphone mode and switch to
handset mode during the call:
c
Press the Talk key.
Note:
If you wish to replace the handset in the charg-
ing shell during a call, e. g. because the battery
is empty, hold down the Speakerphone key.
Voice dialling
With the voice dialling function, you can dial a number
simply by saying the partner's name. You do not need
to manually dial a phone number.
For this function, you will need to record a voice pattern,
in other words, your voice saying the name will be
saved in the handset. Up to four users can save a voice
pattern for each entry. The user must be identified, i.e.
as User 2, before recording. A total of 29 voice patterns
can be saved for telephone directory entries. An entry
that has a corresponding voice pattern is marked with a
mouth in the voice telephone directory.
Recording a voice pattern for an existing telephone
directory entry
You should record your voice pattern in a quiet environ-
ment. There should be about 25 cm between you and
the handset.
D
Open telephone directory.
D E
Select the required entry.
Press the Display key.
Voice
[
Select and confirm the menu item.
[
Press and confirm the Display key.
Say the name when the relevant prompt is displayed.
Repeat the name after being prompted again. The re-
cording will be saved automatically.
Advertisement
Table of Contents
