Toyota 4-Runner-U 2006 Manual page 285

WWW.MANUALS.WS
4. Floor/Windshield—Air flows
from the floor vents and windshield
vents and fan speed may increase in
order to clean up the front view.
This button allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
If you want to return the setting to
RECIRCULATE mode, press the air in-
take selector button once again.
5. Windshield—Air flows mainly from the
windshield vents and fan speed may
increase in order to clean up the front
view.
Pressing this button once again returns
the air flow mode to the last one used.
This button allows the air intake to
select FRESH automatically. This is to
clean up the front view more quickly.
It is not possible to return to RECIR-
CULATE in this mode.
For details about air flow selector settings,
see "Air flow selector settings" described
below.
WWW.MANUALS.WS
'06 4Runner_U (L/O 0508)
mainly
Air intake selector
Push the button to select the air source.
An indicator light will illuminate to show
which the air source is being selected.
1. Recirculate—Recirculates the air inside
the vehicle.
2. Fresh—Draws outside air into the sys-
tem.
To prevent fogging up of the windshield,
the air intake mode may change automati-
cally to FRESH depending on the condi-
tion of the air conditioning system.
For example, when the ambient tempera-
ture is low, the air intake mode may
change automatically to FRESH. This is
not a malfunction.
If the ambient temperature is low when
the ignition switch is turned to the "ON"
position, the air intake mode is always set
to FRESH even though the previous mode
was RECIRCULATE.
"A/C" button
To turn on the air conditioning, push the
"A/C" button. The "A/C" button indicator
will come on. To turn the air conditioning
off, push the button again.
If the "A/C" button indicator flashes, there
is a problem in the air conditioning system
and the air conditioning automatically
shuts off. If this happens, take your ve-
hicle to your Toyota dealer for service.
285