Toyota 4-Runner-U 2006 Manual page 131

Table of Contents

Advertisement

WWW.MANUALS.WS
Position 2 or 3 with the headlights on—
The lights automatically turn off after 30
seconds when all the side doors and back
door are closed with the ignition key in
the "ACC" or "LOCK" position.
If the "LOCK" switch of the wireless re-
mote control transmitter is pushed twice
simultaneously,
the
lights
automatically
turn off immediately.
The time before the headlights turn off
can be changed. For details, contact your
Toyota dealer.
If the driver's door is kept open, the lights
automatically turn off after 30 minutes.
To turn them on again, turn the key to the
"ON" position or actuate the headlight
switch.
If you are going to park for over one
week, make sure the headlight switch is
off.
NOTICE
To prevent the battery from being dis-
charged, do not leave the lights on
for a long period when the engine is
not running.
WWW.MANUALS.WS
'06 4Runner_U (L/O 0508)
Daytime running light (DRL) system (all
models sold in Canada and some mod-
els sold in U.S.A.)
The Daytime Running Light (DRL) system
can make it easier for others to see the
front of your vehicle during the day. The
DRL system can be helpful in many differ-
ent driving conditions, but they can be
especially helpful in the short periods after
dawn and before sunset.
The DRL system will make your front turn
signal lights come on when:
"
The ignition is on with the engine run-
ning.
"
The knob is in the "OFF" position,
position 1 or position 3 with the tail
lights on.
"
The parking brake is released.
To turn off the DRL system, twist the knob
to position 2 or position 3 with the head-
lights on, or turn the ignition switch off.
This DRL system can be disabled. For
details, contact your Toyota dealer.
High- Low beams—For high beams, turn
the headlights on and push the lever away
from you (position 1). Pull the lever to-
ward you (position 2) for low beams.
The headlight high beam indicator light
(blue light) on the instrument panel will
tell you that the high beams are on.
Flashing
the
high
beam
headlights
(position 3)—Pull the lever all the way
back. The high beam headlights turn off
when you release the lever.
You can flash the high beam headlights
with the knob turned to "OFF".
131

Advertisement

Table of Contents
loading

Table of Contents