Table of Contents
Advertisement
A. By Master/Slave built-in program function.
By linking the units in master/slave connection, the first unit will control the other units
to give an automatic, sound activated, synchronized light show. This function is good
when you want an instant show. You have to set the first unit in Automatic, sound
activated mode . Its DMX input jack will have nothing plugged into it. The other units will
have to select SLAV , Their DMX cables plugged into the DMX input jacks (daisy chain)
and the slave led lights will constantly on.
Example for a "RED only" color show controlled by music :
MENU
« MAnU »/ ENTER /r255/ENTER
DOWN
DOWN
DOWN
Then ,
MENU
With buttons DOWN & UP , find « SOUn » then ENTER
With buttons DOWN & UP , select « Sd-1 à Sd-3 »
With buttons DOWN & UP , select « SP-1 à SP-8 » ( to adjust mic sensitivity)
IMPORTANT NOTE : The « SOUn » or « Auto » modes will show ONLY colors with set
up values not 000 .
« G00 0 »/ ENTER
« b000 »/ ENTER
« U000 »/ENTER
Then ENTER
Then ENTER
Red = 255 (= Max)
Green= O ( =Min)
Blue= 0 ( = Min)
White= 0 ( = Min)
15
Advertisement
Table of Contents
