Advertisement
Equinox Taurus Laser
Operation modes
Operation modes:
The Taurus has four modes of operation as follows:
1, Sound active mode
To select sound active mode set all dipswitches to OFF. You can now use the sensitivity control
on the back panel to set the required sound level. With no music present, the laser diode will turn
OFF and will come back ON as soon as the music starts again.
2, Auto pattern mode
To select auto pattern mode, set dipswitch 1 to the ON position and all others to OFF. The
Taurus will now cycle through all it's internal geometric patterns. In this mode the laser diode will
remain on constantly until the power is turned OFF or the mode is changed.
3, Auto animation mode
To select auto animation pattern mode, set dipswitch 1 + 2 to the ON position and all others to
OFF. The Taurus will now cycle through all it's internal animation programmes such as a
walking cat, running dinosaur and flying bird etc. In this mode the laser diode will remain on
constantly until the power is turned OFF or the mode is changed.
4, DMX mode
To select DMX mode, set dipswitch 10 to ON. You can now set the required DMX address using
dipswitches 1 to 9. Please refer to the chart below for DMX functions.
DMX function chart:
Advertisement
