(2)Models:GWHD(24)NK3FO GWHD(24)NK3GO GWHD(28) NK3FO
Take GWHD(28) NK3FO for example(Only cut-off valve of valve support, electronic expansion valve and coil have some differences)
Steps
1. Remove valve cover and top panel
Twist off the screws used for fixing and valve
a
cover , pull v alve cover up ward to remove it.
b
Remove the 3 screws connecting the top
panel with the front panel and the right side
plate, and then remove the top panel.
2. Remove grille,front side plate and panel.
a
Remove
the 2 screws connecting the grille
and the panel, and then remove the grille.
b
Remove the 1 screw connecting the front side
plate and the panel,and then remove the front
side plate.
94
Procedure
grille
front side plate
Service Manual
valve cover
top panel
Installation and Maintenance