4.
Remove the spark plug.
Figure 51
Checking the Spark Plug(s)
Important:
Do not clean the spark plug(s).
Always replace the spark plug(s) when it has a
black coating, worn electrodes, an oily film, or
cracks.
If you see light brown or gray on the insulator, the
engine is operating properly. A black coating on the
insulator usually means the air cleaner is dirty.
Set the gap to 0.76 mm (0.03 inch).
Figure 52
Installing the Spark Plug(s)
1.
Install the spark plug(s) as shown in
2.
Install the hydraulic shroud
g008803
g027478
g206628
Figure
53.
(Figure
50).
43
Figure 53
g027661