Servicing The Spark Plug(S) - Toro 72958 Operator's Manual

Figure 49
Note:
Ensure that the oil-filter gasket touches
the engine, and then turn the oil filter an extra
3/4 turn.
3. Fill the crankcase with the proper type of new
oil; refer to Engine-Oil Specifications (page

Servicing the Spark Plug(s)

Service Interval: Every 200 hours—Check the spark
Every 500 hours—Replace the spark plug(s).
Type: Champion XC12YC
g008804
Air Gap: 0.76 mm (0.03 inch)
Removing the Spark Plug(s)
1. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
2. Disengage the PTO, move the motion-control
levers to the N
engage the parking brake.
3. Remove the left hydraulic-unit shroud in the
order listed with
access to the front spark plug.
g027477
40).
1. Pull this tab out to the
side in the direction of the
arrow
2. Pull the shroud off this
frame tab in the direction
of the arrow
42
plug(s).
-L position, and
EUTRAL OCK
Figure 50. This gives you
Figure 50
3. Pull the shroud off this
frame tab in the direction
of the arrow
4. Shroud
g009922
g009919