Part Identification Chart - Pro-Form PFEL55916.1 User Manual

PART IDENTIFICATION CHART

Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each
drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the
key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it
has been preassembled. Extra parts may be included.
M8 Locknut M5 Washer M8 Washer M10 Split
(102)–4 (32)–2 (97)–4 Washer (105)–8
M8 x 28mm
Washer (127)–2
M4 x 16mm
M4 x 16mm
M8 x 13mm M8 x 20mm M8 x 38mm Bolt
Screw (101)–16 Machine
Screw (120)–2
Screw (82)–6 (96)–4
Screw (9)–4
M10 x 122mm Screw
M10 x 25mm
(104)–4
Screw (92)–4
6