Drying Programmes - Beko B3D59644UW User Manual

Then, depending on the model of the
product, "Rinse Hold
" options appear on the display.
Spin Speed Adjustment button only
works backwards. For example, if
you want to select 1000 rpm while
800 rpm (cycle/min) is written on the
display, you need to press the but-
ton several times until you reach
1000 rpm, going backwards from
800 rpm.
If you are not going to unload your laundry
immediately after the programme completes,
you can use Rinse Hold function in order to
prevent them from getting wrinkled when
there is no water in the machine.
This function holds the laundry in the
final rinsing water. If you want to spin
your laundry after the Rinse Hold
function:
a. Adjust the Spin Speed.
b. Press Start / Pause. The programme will
resume. Machine drains the water and
spins the laundry.
If you want to drain the water at the end of
the programme without spinning, use No
Spin function.
No change can be made in pro-
grammes where spin speed adjust-
ment is not allowed.
You can change the spin speed after the
washing starts if the washing steps allow it.
Changes cannot be made if the steps do not
allow it.
Auxiliary function selection for drying:
" and "No Spin
EN / 29
When you select a new washing program,
press the Auxiliary Function Selection button
to set the drying option suitable for this pro-
gram.
In programmes that do not allow the
drying setting, when the Drying auxil-
iary function button is pressed, the
drying light will not change and a
warning noise will be heard.
For only drying programmes, set the
appropriate drying option by press-
ing the Auxiliary Function Selection
button.

6.8 Drying Programmes

WARNING
The machine automatically cleans
the lint that from the laundry during
drying programme. The machine
uses water during drying. For this
reason, the water tap of the machine
should also be open during drying
programmes.
When you select a new washing
program, press the Auxiliary Func-
tion Selection button to set the dry-
ing option suitable for this program.
In drying programmes, there is a spinning
step. Your machine performs this process in
order to shorten the drying duration. When
the drying programme is selected, the spin
speed setting is in the range of Maximum
spin speed.
In programmes that do not allow the drying
setting, when the Drying auxiliary function
button is pressed, the drying light will not
change and a warning noise will be heard.
For only drying programmes, set the appro-
priate drying option by pressing the Auxiliary
Function Selection button.
In case of water outage, washing
and drying cannot be performed.