Beko B3D59644UW User Manual page 41

corner. Perform the setup by following
both the steps below and the steps in the
HomeWhiz Application.
b. To start the setup, make sure that your
machine is turned off. Press and hold the
Temperature button and the Remote
Control Function button simultaneously
for 3 seconds to switch your machine to
HomeWhiz setup mode.
c. When the appliance is in HomeWhiz
setup mode, you will see an animation on
the display and the bluetooth icon will
flash until your machine gets paired with
smart device. Only programme knob will
be active in this mode. Other buttons will
be inactive.
d. Follow the instructions in display of
HomeWhiz application.
e. Wait until the installation is complete.
When setup is complete, give your wash-
ing machine a name. Now, you can tap
and see the product you have added in
the HomeWhiz Aplication.
Your washing machine will automat-
ically turn off if you cannot realize the
setup successfully within 5 minutes.
In this case, you have to start the
setup process all over again. If the
problem continues, please contact
the Authorised Service.
You can use your washing machine
with more than one smart device. To
do this, download the HomeWhiz
app on the other smart device as
well. When you launch the app, you
will need to log in with the account
you previously created and paired
your washing machine. Otherwise,
please read "Setting up a washing
machine that is connected to
someone else's account".
You need internet connection on
your smart device to proceed with
HomeWhiz setup. Otherwise, the
HomeWhiz application will not let
you finish the setup procedure suc-
cessfully. Please contact your inter-
net service provider if you are having
problems with your internet connec-
tion.
HomeWhiz Application may require
you to type the product number
shown on the product label. You can
find the product label inside of the
appliance door. The product number
is located on this label.
EN / 41