End Time - Beko B3D59644UW User Manual

If the laundry is not at the desired dryness
level at the end of the drying programme,
timed drying can be selected to finish the
process.
When this function is selected, the machine
performs drying for the set time regardless of
the drying level.

6.13 End Time

Time display
When the end time function is selected, the
remaining time until the programme starts is
shown in hours such as 1h, 2h, and the re-
maining time to complete the programme
after your programme starts is shown in
hours and minutes as in the 01:30 example.
Programme duration may differ from
the values in section "Programme
and consumption table" depending
on the water pressure, water hard-
ness and temperature, ambient tem-
perature, amount and the type of
laundry, auxiliary functions selected
and the changes at the mains
voltage.
With the End Time function, the end time of
the programme may be set up to 24 hours.
After pressing End Time button, the pro-
gramme's estimated ending time is dis-
played. If the End Time is set, End Time in-
dicator is illuminated.
In order for the End Time function is activ-
ated and the programme is completed at the
end of the specified time, you must press
Start/Pause button after adjusting the time.
If you want to cancel End Time function,
press On/Off button to turn off and on the
machine.
When you have activated the End
Time function, do not add liquid de-
tergent in the powder detergent
compartment no 2. There is the risk
of staining of the clothes
a. Open the loading door, place the laundry
and put detergent, etc.
b. Select the washing programme, temper-
ature, spin speed and, if required, the
auxiliary functions.
c. Set the End Time of your choice by
pressing the End Time button. End Time
indicator lights.
d. Press Start / Pause. Time countdown
starts.
Additional laundry can be added into
the machine during the End Time
countdown. At the end of the count-
down, End Time indicator turns off,
washing cycle starts and the time of
the selected programme appears on
the display.
The door remains locked during the
End Time countdown. To unlock the
door, you need to put the machine
in pause mode by pressing the pro-
gramme start/pause button. At the
end of the countdown, End Time in-
dicator turns off, washing cycle
starts and the duration of the selec-
ted programme appears on the dis-
play.
When the End Time selection is
completed, the time appearing on
the display consists of end time plus
the duration of the selected pro-
gramme.
EN / 37